The Rohm and Haas Paint Quality Institute Where a great paint job begins
home press room design center content partners FAQs quality paint shop PQI
   
resource library
do it yourself for the contractor for the seller and specifier resource library
  definition of quality
paint ingredients
glossary
press room
links

Ingredients of Paint

PIGMENTSPROVIDE COLOR, HIDING AND BULK

Pigments are finely ground particles or powders which are dispersed in paints. Many of the same pigments are utilized in latex and oil-based paints.

There are two primary categories of pigments:

1. Prime pigments: These are the pigments that provide whiteness and color; they are also the main source of hiding capability.

Titanium dioxide (TiO2), is the predominant white pigment. It has these characteristics

  • provides exceptional whiteness by scattering light

  • provides whiteness and hiding in flat or glossy paint, whether wet, dry or rewetted is relatively expensive

  • use of appropriate extender(see section below) assures proper spacing of TiO2 particles to avoid crowding and loss of hiding, especially in flat and satin paints

  • has more chalking tendency in exterior paints than most color and extender pigments

Color pigments provide color by selective absorption of light. There are two main types:

Organic: These include the brighter colors, some of which are not highly durable in exterior use. Examples of organic pigments are phthalo blue and hansa yellow.

Inorganic: Generally not as bright as organic colors (many are described as earth colors), these are the most durable exterior pigments. Examples of inorganic pigments are red iron oxide, brown oxide, ochers and umbers.

Color pigments are compounded into liquid dispersions called colorants, which are added at the point of sale to tint bases, and to white paints designed for tinting. In the factory, color pigments are used as dry powders and in liquid colorant form to make prepackaged color paints.

2. Extender pigments (or "extenders") provide bulk at relatively low cost. They add much less hiding than TiO2, and impact on many properties, including sheen, scrub resistance, exterior color retention, and others. Some commonly used extenders are:

Clay: Aluminum silicates (also called kaolin and china clay) are used mainly in interior paints, but also in some exterior paints. Calcined (heated to drive off water and create air-particle interfaces) clay provides more hiding than most extenders; delaminated clay enhances stain resistance.

Silica and silicates: These provide scrub and abrasion resistance. Many of these exhibit excellent durability in exterior paints

Diatomaceous silica: This is a form of hydrous silica consisting of ancient fossilized single-cell organisms. It is used to control sheen in paints and varnishes.

Calcium carbonate: Also called chalk, this is a general purpose, low cost, low hiding pigment used in both interior and exterior paints.

Talc: Magnesium silicate--a relatively soft general purpose extender used in interior and exterior paints.

Zinc oxide: This is a reactive pigment helpful with mildew resistance, corrosion inhibition and stain blocking. It is used mainly in primers and in exterior paints.

BACK TO TOP

 

 

Site Map | Webmaster | About PQI | Links
Copyright ©2000-2008 The Rohm and Haas Paint Quality Institute.
All Rights Reserved. Terms and Conditions | Privacy Statement |   PQI France PQI Germany PQI Sweden PQI UK PQI South Africa PQI China PQI Russia PQI Brazil PQI Australia/New Zealand